Glasurit 285-38 HS Filler white 3 Liter
Wet-on-wet surfacer for economical repairs
Properties
- No sanding and no drying times; very safe to spray; good finish, good weathering resistance To use in every mixing ratio with 285-49 Glasurit Non-Sanding Filler VOC black, to get different grey colors.
Remarks
- Before filler application: fine sand body-filled areas and old paintwork with P320 (dry). Use 581-90
Guide Coat. - No need to sand new e-coated parts
- Prime sand-throughs with 283-150 Glasurit® etch primer filler.
- If mixed with 522-10 Glasurit Plastic Additive, the product can be used on all coatable plastics that
are commonly used in the automotive industry - Parts coated with 285-38 can be overcoated without intermediate sanding for up to 5 days
2004/42/IIB(c II)(540)530: The EU limit value for this product ( product category: IIB.C II ) in ready to use form is max 540 g/litre of VOC. The VOC
content of this product is 530 g/litres.