
Finixa Spon Tape 13mm x 50m SPT13
▪ Rounded foam strip for masking joints between two panels.
▪ One side of the strip has been treated with heat resistant
adhesive. Simply stick to the inside of one of the panels and
close the other panel.
▪ Protects the joint perfectly, absorbs the paint and avoids edge
building.
▪ After drying remove directly to avoid adhesive staying on the
panel.
Next to the familiar round versions (SPT 13-17), we now also
have an oval version available (SPT 25). This offers the following
advantages:
▪ Unlike SPT 13-17, SPT 25 does not need to be stuck to the
inside of the backwing, but to the inside of the door.
This has 2 important advantages:
▪ The paint never comes in contact with the glue layer of SPT 25.
▪ Furthermore SPT 25 can still be repositioned for a perfect
fi nishing, after closing the door (see application photos).
▪ SPT 25 is eccentrically glued on the right side, due to
which this foam is perfect to use with fade out spraying,
without edge forming.
Tip:
Make sure the adhesive cannot make contact with the
paint to exclude chemical reactions.
Tip:
Make sure the surface is well degreased before applying SPT.
Tip:
Never stretch the foam to garantee a good adhesion.
▪ One side of the strip has been treated with heat resistant
adhesive. Simply stick to the inside of one of the panels and
close the other panel.
▪ Protects the joint perfectly, absorbs the paint and avoids edge
building.
▪ After drying remove directly to avoid adhesive staying on the
panel.
Next to the familiar round versions (SPT 13-17), we now also
have an oval version available (SPT 25). This offers the following
advantages:
▪ Unlike SPT 13-17, SPT 25 does not need to be stuck to the
inside of the backwing, but to the inside of the door.
This has 2 important advantages:
▪ The paint never comes in contact with the glue layer of SPT 25.
▪ Furthermore SPT 25 can still be repositioned for a perfect
fi nishing, after closing the door (see application photos).
▪ SPT 25 is eccentrically glued on the right side, due to
which this foam is perfect to use with fade out spraying,
without edge forming.
Tip:
Make sure the adhesive cannot make contact with the
paint to exclude chemical reactions.
Tip:
Make sure the surface is well degreased before applying SPT.
Tip:
Never stretch the foam to garantee a good adhesion.